Plastic Polymer CPVC Resin
Basic Info
Model No.: extrusion grade
Product Description
The CPVC resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white, the CPVC resin is made by chlorination modification of PVC resin and is one advanced engineering material. This product is white or canary loose grain or powder with no smell, odorless and innocuity. After chlorination, the irregularity of molecular bond of the PVC resin and the polarity of molecular chain increase, the dissolvability and chemical stability of the resin also increase, and accordingly improve the heat resistance and resist the corrosion of acid, caustic, salt and oxidant etc. In addition, it improve the mechanical performance of numerical heat distortion temperature and chlorine content increases from 56.7% to 63-69% and Vicat softening temperature from 72-82 °C to 90-125 °C ; its highest service temperature can reach 110 °C and long-term service temperature can reach 95 °C . Accordingly, CPVC is one kind of advanced engineering plastic with vast foreground.
Compound material:
1.The CPVC compound material that is compounded by CPVC and certain inorganic or organic fibers has good shock resistance and its heat resistance is better than other resin ' s compound material. It can be produced into sheet, pipe, corrugated plate and profile shapes etc.
2.CPVC can be used for modification of polyvinyl chloride fiber: the cleaning-solarization temperature of home-made polyvinyl chloride fiber will not be more than 60 °C . Adding 30% CPVC while weaving the polyvinyl chloride fiber can greatly improve the heat resistance of the product and reduce the shrinkage from original 50% to less than 10%.
3.Foaming material The heat resistance of foaming material of CPVC is better than that of PVC. The shrinkage at high temperature is very small. It can be used as heat preservation material of heat water pipe and steam pipe and so on. The retentivity to solvent of CPVA with chlorine content more than 60% is very good. The CPVC can be put into the solvent for foaming which can produce the gas while heated, and you can get the homogeneous and minor forming gas. The solvent such as hydrocarbon, aether and aldehyde etc with boiling point of 50 - 160 °C can be used as vesicant.
4.Others the crossbreed of CPVC and thermoplastic or heat curable plastic can remarkably improve the physicomechanical properties of these materials such as improved the heat resistance of the product. The foreign countries have produced the CPVC with higher impact resilience and better transparency through improvement of production technique. This kind of transparent material can be used for products of automobile, audiovisual products.
Product Categories : CPVC > CPVC Resin